Before attempting any work involving mains water supply lines, ensure the water supply is shut off.
This mixer tap must be installed in accordance with these instructions.
MAX OPERATING PRESSURE:
..............................................................5 bar (500kPa)
RECOMMENDED OPERATION PRESSURE:
..........................................1.5-5 bar (150-500kPa)
MAX HOT WATER TEMPERATURE:
.....................................................65°C
RECOMMENDED HOT WATER TEMPERATURE:
..................................50°C
PR116500CR
Where water pressure exceeds 500kPa, a pressure reducing device is required to be installed. Note that
water pressure overnight can reach 150% of the daytime pressure.
THIS MIXER TAP MUST BE INSTALLED BY A LICENSED PLUMBER IN
ACCORDANCE WITH LOCAL REGULATIONS
This Oliveri tap is manufactured to standard AS/NZS 3718.
Note: Ceramic Cartidges - Warranty claims will not be honoured where the ceramic cartridge has
malfunctioned due to the presence in the water supply of;
- Copper tube pieces, sand, dirt or stones
- Thread tape
- Other objects not normally present in potable water supplies.
- Do not remove the cartridge from the body as it has been pressure tested and tightened to a
specific torque.
Technical Data
Installation Instructions
PR116500CR installation instructions.pdf
Issue Date 30/11/2018 Revision Number: V1.0
Prague Bath and Shower Mixer
CARE & MAINTENANCE
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
SERVICE
Clean with a soft cloth and warm soapy water as necessary - rinse and dry after cleaning. Under No Circumstances
should abrasive or acid based cleaning products be used
.
If a warranty service agent finds that the mixer tap is not at fault, T2 Services Pty Ltd reserves the right to
pass on any callout fee to the householder.
This mixer tap is warranted to be free from manufacturing defects for a period of 15 Years
:
15 years for cartridge
10 years for body, 5 years for seals, tails and fittings, 1 year for finish and labour, when used in a
domestic situation.
This warranty does not cover against normal wear and will be voided if the product is misused or
not installed in accordance with these instructions.
If the problem represents a danger, or damage to property may occur, immediately shut off the water
supply.
If the product requires servicing, please contact your plumber / Installer (preferably the one who installed it).
If the Plumber / Installer is satisfied that the problem is not due to poor installation, contact T2 Services Pty Ltd
for assistance on:
Ph: (07) 55960738
Fax: (07) 55273353
Email: [email protected]
https: //oliveri.com.au/service-and-warranty
In the event this product is rendered obsolete and a replacement product is required, Oliveri Solutions Pty Ltd
reserves the right to supply a product of equal substitution at their discretion.
