Oliver 6303, Руководство пользователя

Страница: 22 / 50

22 |
Page Oliver Machinery 6303 Sander
Dust Chute Installation
1. Gather the dust chute and the mounting
screws.
2. Mount the dust chute on top of the dust port.
3. Secure the dust chute with the mounting
screws.
Stop Bracket Installation
1. The stop bracket provides support to the
workpiece and prevents the workpiece from
getting dragged into the dust chute. It should
be installed while the machine is in use.
2. The stop bracket mounting holes are located
on top of the platen near the drive drum.
Open the dust chute to expose the holes and
allow room to insert the bracket.
3. Secure the bracket with a lock knob.
4. Close the dust chute and lock it in place.