15. Calibration
9
9
F
Step 1: Press
G o
●
●
●
●
Display
Step 2: Use
7
8
9
F
to move the planer table until M15S terminates the calibration and restarts.
16. M15S Troubleshooting
Display
C H A n G E
“Change RST” message appears when the Controller detects a motion in the wrong
direction. For example, the Controller switches the outputs to move upward but the
table starts moving in the reverse direction. Usually this is caused by the wrong
wiring of the three phase motor.
Press
to
clear.
r S t
