Oliver 4235, Руководство пользователя, Страница: 23 / 64

4235 Jointer OLIVERMACHINERY.NET 23 | Page
Controls and Components
Powerswitch
This jointer is equipped with a magnetic paddle
switch. Make sure the paddle is installed before
turning on the machine. The paddle allows the
operator to easily turn off the machine in case of
an emergency.
If the power goes out while the machine is
running, this magnetic power switch will turn off
automatically. This prevents the machine from
restarting expectedly when power resumes.
This switch also comes with a safety feature to
prevent the jointer from turning on by accident.
Lock the switch by inserting a pin or padlock (not
included)
through the “ON” button. Test the
locking device to make sure it can disable the
switch.
Infeed Table Adjustment
The infeed table adjustment lever and depth
scale are located right below the infeed table:
To adjust infeed table height:
1. Rotate the handle counterclockwise to
loosen the locking mechanism.
2. Use the depth scale to set the infeed table
height.
3. Rotate the handle clockwise to lock the table
in place.
Infeed Table Depth Stop Knob
This jointer has a maximum depth-of-cut
capacity of 1/8” for jointing operations. The
purpose of the depth stop is to prevent making a
cut greater
than 1/8” deep.
To create a rabbet with more than 1/8” in depth,
make several passes to gradually remove the
materials. Pull and hold the knob when lowering
the infeed table
below 1/8” .