Oliver 10060, Руководство пользователя

Страница: 33 / 46

10060/10061 Drill Press OLIVERMACHINERY.NET
33 |
Page
Maintenance
Routine maintenance keeps your drill press in top shape. Please follow the maintenance schedule below,
and use the maintenance record worksheet in this manual to document all tasks completed.
NOTICE:
Maintenance schedule may vary for individual users due to different situations and safety requirements.
WARNING
Disconnect the machine from the power source before any maintenance work is
performed. After servicing the drill press, remove all wrenches and tools before
restarting the machine. Failure to comply can cause serious injury!
Maintenance Schedule
Interval Task
Every day Inspect the power cord for signs of aging and damages before starting the
machine. Replace worn parts as needed.
Inspect drill bits before use. Replace damaged and dull drill bits.
Every Month Apply rust protectant on unpainted cast iron surfaces.
Check V-belt tension and inspect the belt for signs of wear and damage.
Lubricate column, quill, and spindle.
Notice : Motor and spindle bearings are permanently sealed and lubricated. They do not require
lubrication.