Oliver 0008, Руководство пользователя, Страница: 5 / 29

4
Unpacking and cleaning
To ensure maximum performance from your 8"
jointer, clean it properly; and install it accurately
before use. As soon as you receive the jointer,
we recommend you follow these procedures:
1. Finish removing the contents of the shipping
carton and compare with the contents list.
2. Report damage, if any to your local distributor.
3. Clean all rust protected surfaces with a mild
solvent or kerosene. Do not use lacquer
thinner; paint thinner, or gasoline. These will
damage painted surfaces.
4. To prevent rust, apply a light coating of paste
wax to surface.
Although some users prefer a wax coating for
the table surfaces, white talcum powder rubbed
in vigorously once a week with a blackboard
eraser will fill any casting pores and form a
moisture barrier. Talcum powder will not stain
wood or mar finishes.
A. Jointer with Fence Assembly............... 1
B. Blade Guard ......................................... 1
C. Push Block ........................................... 2
D. Screw Driver ......................................... 1
E. Open Wrench 11*13 ............................. 1
F. Open Wrench 8*10 ............................... 1
G. HEX. Wrench 8mm ............................... 1
H. HEX. Wrench 6mm ............................... 1
I. HEX. Wrench 5mm ............................... 1
J. HEX. Wrench 3mm ............................... 1
Placement the 8” jointer
This machine should be
installed and operated only
on a solid, flat and stable
floor that is able to support
the weight of the Jointer (366
lbs-166kgs) and the operator.
Using the dimensions shown
as below (L 72 ”x W 2 5”x H
36”), plan for placement
within your shop that will
allow the operator to work
unencumbered and
unobstructed by foot traffic or
other tools or machinery.
Extra parts:
BYRD Helical Cutterhead with a sleeve screw
driver. a Trox sleeve & 3 inserts
A
G
F
B
E
C
D
H
I
J