Reports
5/622/7410 (13)
34
■
■
■
■
Background Journal
The electronic journal is a function which enables the recording of a journal without the
need for a 2-station printer mechanism or special paper roll with carbon copy facility.
After programming FLAG 02 appropriately, the transactions are recorded in a memory
module and can be printed as required. The memory module has a capacity of 4000
lines.
■
■
■
■
Deleting the journal
There are various ways to delete the journal:
1. Printing out Z-reports
2. Set the key to position
Z
; press
2
, the journal is
printed
and deleted.
■
■
■
■
Printing the journal
There are six different options for printing. The print options differ in their scope,
deleting function and the sequence of printing.
1.
Full printout
Set the key to position
X
; press
2
,
the entire journal is printed (last registration first).
2.
Full printout
Set the key to position
Z
; press
2
,
the entire journal is printed (last registration first), journal is deleted.
3.
Print last registrations (from the end)
Set the key to position
R
; press
2
, "
JOURNAL
" appears in the display, after
two seconds "
CUS
" appears with the maximum number of lines in the journal; enter
the number of lines to be printed; press
2
.
Number of lines specified as printed from the journal (last registration first).
■
■
■
■
Miscellaneous
1. The time, date and the first and last registrations are printed at the end of the
journal, as in a table of contents.
2. No registrations are stored when Training mode is activated.
3. When the journal is full, an error message appears ("
EJ-FULL
") and the cash
register is blocked against use. In this case, the journal must be printed (key in
position Z).
When Training mode is activated, the cash register can still be used normally.