Olimpia splendid Maestro Smart Series, Инструкция по установке, использованию и техническому обслуживанию, Страница: 12 / 23

Failing to comply with the instructions contained in this manual and using the unit with temperatures exceeding the permissible range will
invalidate the warranty.
Routine maintenance of the filters and general external cleaning can be done by the user as these operations are not difficult or
dangerous.
During the assembly and each maintenance operation, always pay attention to the warnings described in this manual and on the labels
affixed inside the appliances, and respect anything suggested by common sense and those of the Safety Norms in force in the place of
installation.
Always wear Personal Protection Devices when servicing the unit.
These units MUST NEVER be installed in rooms where flammable gas, explosive gas, or excessive humidity (laundry rooms, greenhouses,
etc.), or in rooms where there are other units that generate excessive heat. Should components need replacing, always use
OLIMPIA
SPLENDID original spare parts.
IMPORTANT!
To avoid any risk of electric shock always deenergize the unit before making electrical connections or any maintenance
procedures.
IMPORTANT!
Do not allow R-410A to escape into the atmosphere: R-410A is a fluorinated greenhouse gas, as cited in the Kyoto Protocol, with
a Potential Global Warming effect (GWP) = 2088.
1.3 WARNING
The
unit
should be used for the exclusive purpose of producing hot or cool air for the sole purpose of obtaining a comfortable
temperature in the room. Improper use of the equipment, which may cause injury/damage to persons, property or animals, relieves
OLIMPIA SPLENDID of any liability.
1.4 LIST OF SUPPLIED COMPONENTS
In addition to the unit this package includes the parts listed below. Before installing verify the parts are within easy reach.
A - Strip of adhesive isolating tape
B - Air inlet and outlet external grids including chains and kit for installing the grids (n.2)
C - Internal flanges (2)
D - Sheet for wall pipes
E - Kit of screws and anchor bolts
F - Wall anchoring bracket
G - Use and maintenance manuals and warranty document
H - Remote control
I - Paper template to make holes
1.4.1 Storage
Store units in an area protected from outdoor ambient conditions. Units should be stored on pallets or beams to isolate from the ground.
DO NOT TURN THE UNIT OVER OR DAMAGE WILL RESULT.
1.4.2 Receipt and unpacking
The products are packaged by qualified personnel using suitable packaging material. The units are shipped complete and in perfect condition
when leaving our facility. However, we suggest that you perform the following checks:

Upon receipt check if the package is damaged. If damage is found note this on the shipping documents taking photographs of any
damage. Notify the shipper by registered mail with 3 days of receipt.

Unpack and check the contents against the packing list.

C heck that none of the components have been damaged during transport; if damage is found notify the shipper by registered letter,
which should include photographic evidence within 3 days of receiving the unit.

Send the same information by fax to OLIMPIA SPLENDID .

No claims for damage will be accepted if made more than 3 days after the delivery of the goods .
Important note:
It is recommended to keep the packaging during the warranty period for any possible delivery of the product to a service center. After the
warranty period ends dispose of the packaging in compliance with prevailing regulations.
1
10