Olimpia splendid Bi2 Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 79 / 88

Bi2 Air
EN - 17
ENGLISH
3.5 - MANUAL COOLING/ HEATING MODE
From board the machine
a . To activate/deactivate this function, keep cooling/heating selection key “ T3 ” pressed for 10 seconds until
the blue and red symbols (A5) light up alternatively.
This setting is maintained also in the event of power interruption.
b . Pressing key “ T3 ” for 2 seconds allows to cyclically select cooling (blue LED), heating (red LED) or fan
(red LED and blue LED off) mode.
From remote controller
a . To activate/deactivate this function, press key “ B2 ” until the heating only (10) or cooling only (11) symbols
appear on the remote controller
3.6 - FAN MODE
When this mode is used, the appliance does not exercise any action on temperature or air humidity in the
room, but only keeps it in circulation.
From board the machine
a . Pressing key “ T3 ” for 2 seconds allows to cyclically select cooling (blue LED), heating (red LED) or fan
(red LED and blue LED off) mode.
b . Under this operating mode, the internal fan is always on and it is possible to select the desired speed of
WKHIDQDWDQ\PRPHQWE\SUHVVLQJWKHVSHFL¿FNH\³
T2 ”.
The desired temperature which operates on the automatic speed of the fan can be selected only
from board the machine: the more the desired temperature deviates from ambient temperature,
the more the fan speed is high.
These are the possible speeds for the fan.
MAXIMUM speed
MINIMUM speed
AUTO speed
From remote controller
a . This function can be selected by pressing key “ B2 ” until when the two heating (10) or cooling (11) symbols
are both off.
b . Under this operating mode, the internal fan is always on and it is possible to select the desired speed of
WKHIDQDWDQ\PRPHQWE\SUHVVLQJWKHVSHFL¿FNH\³
B6 ”.
In fan mode, the solenoid valve remains disabled, while the fan is activated at the set speed.
3.6.a - Operation at maximum speed
From board the machine
a . To select this mode, press key “ ” (T2) several times until the indicator (A4) activates.
b . With this mode it is possible to obtain the maximum supplied power both in cooling and heating modes
(the fan motor is always active at maximum speed).
From remote controller
a . To select this mode, press key “ B6 ” several times until the indicator (6) activates completely.