Olimpia splendid Bi2 Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 78 / 88

EN - 16
ENGLISH
3.3 - USE OF THE REMOTE CONTROLLER
The remote controller supplied with the appliance has been designed so as to grant it maximum robustness
and exceptional functionality, but it still needs to be handled with care.
Avoid:
• leaving it exposed to rain, pouring liquids on its keyboard or dropping it in water;
• making it undergo excessive shocks or dropping it on hard surfaces,
• leaving it exposed to sun rays,
• interposing obstacles between the remote controller and the appliance while the remote controller
is being used.
Additionally:
•
if other appliances equipped with remote controller (TV, radio, stereo units, etc.) are used in the
same room, some interferences may occur;
•
HOHFWURQLFDQGÀXRUHVFHQWODPSVPD\LQWHUIHUHZLWKWKHFRPPXQLFDWLRQVEHWZHHQWKHUHPRWH
controller and the appliance,
• extract the batteries in case of prolonged inactivity of the remote controller.
3.3.a - Inserting the batteries
To correctly insert the batteries:
a . Remove the cover of the battery compartment (Fig.21).
b
,QVHUWWKHEDWWHULHVLQWKHVSHFL¿FFRPSDUWPHQW)LJ
Scrupulously respect the polarities indicated on the bottom of the battery compartment.
c . Correctly close the cover (Fig.21).
3.3.b - Replacing the batteries
Always use new batteries.
The use of old batteries or of batteries of a different type may generate a malfunction of
the remote controller.
- The remote controller uses two 1,5V dry-cell alkaline batteries (AAA type) (Fig.21).
3.4 - USE OF THE APPLIANCE
To use the appliance, work as follows.
D$SSOLDQFHVZLWFKLQJRQRႇ
In the event that a main switch has been installed on the power line, it must be switched on.
a . To switch on/off the fan coil/fan radiator, press key “ ” (T2) for 2 seconds.
b . The appliance can be switched on or off by pressing key “ B1 ” on the remote controller.
All the timers are reset when the appliance is switched off.
7KHDEVHQFHRIDQ\OLJKWVLJQDOLGHQWL¿HVWKHµVWDQGE\¶VWDWXVDEVHQFHRIIXQFWLRQ
When the control is set to this mode of operation, it ensures safety against freezing. In the event that am-
ELHQWWHPSHUDWXUHGURSVEHORZƒ&WKHKRWZDWHUVROHQRLGYDOYHDQGWKHIDQPRWRUDWPLQLPXPVSHHGDUH
activated, the display shows code “AF”.