Olimpia splendid Bi2 Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 73 / 88

Bi2 Air
EN - 11
ENGLISH
D0RXQWLQJRIWKHFRQGHQVDWLRQGUDLQGHYLFHLQWKHYHUWLFDOYHUVLRQ¿J
a.
&RQQHFWDSLSHIRUOLTXLGRXWÀRZWRWKHGUDLQDJHMXQFWLRQRIWKHFRQGHQVDWLRQFROOHFWLRQEDVLQ
b. Lock it adequately.
c. Check that the drip edge extension (17) is present and installed correctly.
E0RXQWLQJRIWKHFRQGHQVDWLRQGUDLQGHYLFHLQWKHKRUL]RQWDOYHUVLRQ¿J
For mounting of the horizontal basin on SL versions, please refer to the instructions contained in the
corresponding optional kit.
a. Cut, under the side cover corresponding to the condensation drain pipe outlet, the precut area (18).
b. Reposition the side cover.
• Make sure the machine is perfectly levelled once installed, or with a slight in-
clination towards the direction of the condensation drain;
• Insulate the delivery and return pipes well up to the entrance of the machine,
so as to prevent condensation dripping out of the collection basin itself;
• Insulate the condensation drain pipe of the basin for its whole length.
2.8 - ROTATION OF CONNECTIONS
The described operations and their images refer to a machine with connections to the left on which the rotation
of the connections on the right side is necessary. If you have at your disposal a machine with connections to
the right with the need of rotation to the left, the sequence of operations is the same, only the images must
be considered as specular.
)RUFRQQHFWLRQRIWKHHOHFWULFDOFRPSRQHQWVLWLVQHFHVVDU\WRXVHWKHVSHFL¿FRSWLRQDONLW
D'LVPRXQWLQJRIWKHUDGLDQWSDQHORQO\IRU6/5¿J
a.
5HPRYHWKHDLU¿OWHUVRQWKHORZHUVLGH
b.
8QGRWKH¿[LQJVFUHZVRIWKHIURQWSDQHODQGGLVPRXQWLWE\UHPRYLQJLWIURPWKHORZHUKRRN
c. Remove the upper insulating material of the battery (22);
d. Unscrew the upper inlet connector (23)
e. Unscrew the lower outlet connector (24);
f. Extract the panel with coil (25).
g. Dismount all the collector groups (26).
F'LVPRXQWLQJRIWKHFRQWUROSDQHO¿J
a.
'LVPRXQWWKHFRQWUROSDQHOE\XQGRLQJWKHWZR¿[LQJVFUHZVD
b. Disconnect the connectors of the electrical connections.
c. Remove the wiring inside the machine and reinsert them on the opposite side.
d.
8VHIRUWKHPRWRUGLVSOD\ÀDSPRWRUFRQQHFWLRQWKHVSHFL¿FZLULQJIRUULJKWFRQQHFWLRQVDYDLODEOH
as an accessory.
e. Dismount the condensation collection basin (7) and remount it on the opposite side with the corre-
VSRQGLQJ¿[LQJVFUHZVD