Olimpia splendid ARYAL S1 E 10 C, Инструкция по эксплуатации и техническому обслуживанию, Страница: 67 / 316

ARYAL S1 E INVERTER 10-12-18-24 C
EN - 23
ENGLISH
•
The air conditioner will operate as follows:
- Fan only mode with fan at low speed (13 minutes) -
- Heating with fan at low speed (1 minute)
- Fan only operation (2 minutes)
- Stop operation
- Unit switch-off.
This function is only available in COOL (AUTO COOL, FORCED COOL) and DRY modes.
Before selecting this function, it is recommended to start the air conditioner in cooling
mode for approx. 30 minutes.
Once the Auto Clean function is activated, all timer settings will be annulled.
If the AUTO CLEAN button is pressed again during operation in auto-clean mode, the
function stops and the appliance switches off.
3.4.6 - SILENCE function
•
This function reduces noise.
3.4.7 - FP function
• The FROST PROTECTION function sets the temperature at 8°C.
The function is available in “HEAT” mode only.
3.4.8 - TIMER keys (7 and 8)
• These keys are used to set the switch-on “ ON ” and switch-off “ OFF ” time of the air conditioner.
3.4.9 - SILENCE/FP key (9)
•
Press this key for less than 2 seconds to start the SILENCE function.
If the key is held down for more than 2 seconds, the FP (FROST PROTECTION). function is activated.
3.4.10 - SLEEP key (10)
•
Press this key to access the SLEEP mode; press it again to annul.
The function can be activated only in COOL, HEAT and AUTO modes and allows to maintain the temperature
as comfortable as possible.
When the unit is running in SLEEP mode, this will be annulled if the MODE, FAN SPEED and ON/
OFF keys are pressed.
3.4.11 - LED/FOLLOW ME key (11)
• Press this key for less than 2 seconds to start the LED function.
If the key is held down for more than 2 seconds, the FOLLOW ME function is activated.
•
Press the LED key to reset the air conditioner digital display; press it again to activate it.
3.4.12 - Automatic operation (figure 34)
When the air conditioner is put in “AUTO” mode, these will automatically select cooling, heating or fan,
depending on the temperature that has been selected and the room temperature.
Once the operational mode has been selected, the functioning conditions are stored in the memory of the
unit microcomputer and the air conditioner starts to function in the same conditions, when simply pressing
the “ON/OFF” key of the remote control.