DESCRIPTION
INSTALLATION
USE
MAINTENANCE AND
ASSISTANCE
OLI eBike Systems
| High Vision
TROUBLESHOOTING
GENERAL
INFORMATION
ERROR CODES
In the event of a fault, the system signals the problem
to the user by displaying a danger icon combined with
a 4-character code, which allows the user to trace
the type of error.
The following table lists the possible faults and the
4-character codes displayed in the error messages.
Depending on the type of fault, the system may
prevent the motor from starting or run at
reduced power.
Where "request assistance" is indicated, the
intervention of an OLI eBike Systems technician is
required.
error
problem
solution
0001
Battery communication problem. Battery
status data may be displayed incorrectly.
Check that the battery cables and contacts
are intact and connected correctly.
Check the cable connections by removing the
motor,
see the motor user manual
.
0101
Communication problem between power unit
and HMI.
Check that the wiring is intact and connected
correctly.
Check the cable connections by removing the
motor,
see the motor user manual
.
0104
Speed sensor not detected.
Check that the speed sensor is installed and
connected correctly.
Check that the alignment between the magnet
and the speed sensor is correct.
See motor user manual
.
TROUBLESHOOTING
studioimmagina.com 00_102020
32
