01_OED_OLI_00_EN
3
GENERAL INFORMATION
1
OLI EASY DISPLAY
1.
GENERAL INFORMATION
1.1.
PURPOSE OF THE MANUAL
This manual is an integral part of the HMI OLI EASY DISPLAY unit and has been written
by the manufacturer in its original language (Italian) to provide all the information
necessary for an adequate and safe use of the unit throughout its life cycle (from
transport , delivery, use and maintenance up to disposal).
Before carrying out any operation, users and technicians must carefully read the
instructions and strictly comply with them. In case of doubts about their correct
interpretation, contact the manufacturer to obtain the necessary clarifications. Only by
observing what is reported below is it possible to ensure the regular operation of the
unit over time and avoid the occurrence of dangerous situations for people and things.
The manual provides warnings and indications relating to safety regulations for the
prevention of accidents. In any case, operators must observe the safety regulations
on imposed on them by current regulations with the utmost attention. Any changes
to the safety regulations that may take place over time must be acknowledged and
implemented.
CAUTION:
It is recommended that you read this manual carefully before putting the
unit into operation.
With a view to continuous improvement, OLI eBike Systems may change some
characteristics of the components used without notice. This does not affect the validity
of the information contained in this document. If inconsistencies are found between
what is described in the manual and the use of the unit, please notify the manufacturer.
IMPORTANT:
The updated copy of this manual is available on the website www.oli-ebike.
com.
1.2.
PRESERVATION OF THE MANUAL
The use and maintenance manual must accompany the unit throughout its life cycle
and must be available to all operators and technicians who may need it. The manual
must follow the unit if it is transferred to a new user or owner.
