16
MX 32
Instruction Manual
■
The measurements disappear and are replaced
by dashes. The
MX 32
controller continues to
monitor the sensor(s) but the display is hidden.
Navigating the menus
Reminder: for security reasons, only trained personnel (with access
codes) are authorized to use the menus listed below.
To quit a menu at any stage, press the
(
-
) and
(
+
) buttons
together.
Viewing the menus
Action or result
Illustration
■
Press the
button (
MENU/ENTER
).
■
Request for access code.
Note: the first number is blinking.
If there is a response within one minute, the unit
will return to normal mode.
■
Enter the first digit of the code.
Press
(
-
): to decrease the number.
Press
(
+
): to increase the number.
Press
(
ENTER
): to confirm the number.
■
Proceed to the next stage for each of the other 3
numbers in the code.
■
Final display of the access code.
■
Confirm the code by pressing
(
MENU/ENTER
).
■
The menu flashing
PRG
(
Programming
) is
displayed.
See page 18 for instructions on using this menu.
■
Press
(
+
) to display the
CAL
menu
(
Calibration
).
See page 23 for instructions on using this menu.
Содержание MX 32
