Oldenbourg group euv-400, Руководство по эксплуатации и ремонту, Страница: 15 / 60

2-7
SECTION 2
SAFETY
PREVENT MACHINE MOVEMENT
ALWAYS chock wheels before performing any maintenance.
Whether parked on an incline or flat surface, always take the necessary precautions to prevent the vehicle
from rolling. Do not rely exclusively on the park brake to hold the vehicle in place.
Also place the parking brake in the locked position prior to performing any maintenance.
TIRE SAFETY
Explosive separation of a tire and rim
parts can cause serious injury or death.
Do not attempt to mount a tire without
the proper equipment and experience
to perform the job.
Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never
weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire
explosion. Welding can structurally weaken or deform the wheel.
When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side
and NOT in front of or over the tire assembly.
Check tires for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.
RIDERS CAN FALL OFF AND BE KILLED
Seating is provided for operator and one
passenger. No riders are allowed in cargo
box or anywhere else on vehicle.
Riders on vehicle are subject to injury such as being struck by foreign objects or being thrown off of the
vehicle and severely injured or killed.
Riders affect the operator's ability to control the vehicle as well as its center of gravity. Also, riders could
obstruct the operator's view resulting in the vehicle being operated in an unsafe manner.
Never allow riders in the cargo box or other areas where seats are not provided.
ROLLOVER OR FALLING OFF MAY CAUSE DEATH
Read manual carefully.
No loads heavier than the rated load for this machine.