Okolab H201-NIKON-TI-S-ER Скачать руководство пользователя страница 5

Страница: 5 / 17

H201-NIKON-TI-S-ER

User Manual

August 2019

www.oko-lab.com

3.1

Sliding lid

The Sliding Lid is a glass lid allowing for easy sample loading and pipetting. The Sliding Lid is screwed onto the cham-

ber.

Figure 3 shows chamber dimensions with the Sliding Lid (with and without chamber riser). Figure 4 illustrates how to

remove Sliding Lid, when a different Lid is necessary.

NOTE:

Sliding Lid MUST BE REMOVED when using any other Lid.

The Sliding Lid is fixed onto the chamber with 4

screws. Screws location is indicated by letter A in Figure 4 (image 2 and 3). Keep Sliding Lid fully closed to access

screws labeled A in image 2. Open Sliding Lid to access screws labeled A in image 3.

Sliding Lid

Distance between focal plane

and upper side of the glass

lid without the chamber riser

Distance between focal plane

and upper side of the glass

lid with the chamber riser

Chamber top view

Figure 3. H201-NIKON-TI-S-ER (Sliding Lid comes as standard)

Sliding Lid

Screws M2x4

Figure 4. Assembly of the sliding lid

Содержание H201-NIKON-TI-S-ER


















Результаты поиска

Содержание H201-NIKON-TI-S-ER

Отзывы:

Похожие инструкции для H201-NIKON-TI-S-ER

Бренды по названию

Популярные бренды

Okolab H201-NIKON-TI-S-ER, Руководство пользователя

Результаты поиска

Содержание H201-NIKON-TI-S-ER

Отзывы:

Похожие инструкции для H201-NIKON-TI-S-ER

Бренды по названию

Популярные бренды