Okolab CO2-UNIT-BL страница 51 Скачать руководство пользователя | Manualshive

Страница: 51 / 51

background image

48

WARRANTY

Okolab S

.r.l. warrants “CO2

-UNIT-BL [

” to be free of defects in materials and workmanship for a period of

one year starting from invoice date. If the unit malfunctions, it must be returned to the factory for evaluation. If
the equipment has to be returned to the factory, please ensure that is carefully and properly packed. Okolab S.r.l.
accepts no responsibility for damage due to unsatisfactory packing. If the unit is found to be defective, it will be
repaired  or  replaced  at  no  charge.  This  warranty  does  not  apply  to  defects  resulting  from  any  actions  of  the
purchaser.  Components  which  wear  are  not  warranted.  Okolab  S.r.l.  neither  assumes  responsibility  for  any
omissions or errors nor assumes liability for any damage that may results from improper use of its products in
accordance  with  information  provided  by  Okolab  S.r.l.  Okolab  S.r.l.  warrants  only  the  parts  manufactured  by
Okolab S.r.l to be free of defects. Okolab S.r.l. makes no other warranties or representations of any kind whatsoever,
express or implied, except that of title, and all implied warranties including any warranty of merchantability and
fitness for a particular purpose are hereby disclaimed. LIMITATION OF LIABILITY: the total liability of Okolab S.r.l.
shall not exceed the purchase price of the component upon which liability is based. In NO event shall Okolab S.r.l.
be liable for consequential, incidental or special damage.

IST1140_REV03

SV 3.12.3.3048

«
...
49
50
51

Содержание CO2-UNIT-BL




















































Отзывы:

Нет отзывов

Похожие инструкции для CO2-UNIT-BL

Бренд: Bartlett Страницы: 30

Бренд: Ebyte Страницы: 34

Бренд: XVision Страницы: 28

Бренд: YASKAWA Страницы: 61

Бренд: Magnescale Страницы: 132

Бренд: Harsco Industrial Страницы: 57

Бренд: IAI Страницы: 5

Бренд: Vaillant Страницы: 52

Бренд: Vaillant Страницы: 11

Бренд: VAT Страницы: 26

Бренд: Click2Enter Страницы: 34

Expedition EX Double Jogger

Бренд: BABYTREND Страницы: 18

Бренд: Ubiquiti Страницы: 16

Smart Bias-T SBT-6962690-FFM

Бренд: Amphenol Страницы: 2

LX PLUS SIDE X SIDE 11709

Бренд: Delta Children Страницы: 12

SW-HBT4K-C6-4X4E

Бренд: Avenview Страницы: 8

Бренд: Berker Страницы: 17

Бренд: LOVATO ELECTRIC Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды