OKM BODY SCREENER, Руководство пользователя

Страница: 10 / 32

3.2.3 Assembly of the Sensor Unit
The sensor unit and stand can be assembled / disassembled for service reasons or easier
transportation. Please note the following information:
1.
1. Attach the sensor unit to the front panel of the gear
box. 2. Tighten the plastic winged screws.
3. Connect the motor cable with the sensor unit.
4. Plug the power cable into the Body Screener TM .
Then plug the connector into the wall socket.
3.3 Power On / Power Off
By connecting the power supply the Body Screener TM is powered on automatically. It is not
necessary to push an extra power on/off button.
As soon as the Body Screener TM is ready, a short acoustic signal sounds and LEDs within the
semicircular truss flash.
To power off the Body Screener
TM
just unplug the power supply.
10