231
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Command Lists
List of HP-GL and HP-GL/2 Printer Engine Control Commands
The meaning of the symbols in the table is as follows.
Yes : Indicates commands supported by the Printer.
Partially : Indicates commands whose functions are partially supported by the Printer.
No : Indicates commands not supported by the Printer.
If the Printer receives any non-supported commands, it ignores them. If a command not in
the table is received, a command error results.
Command
Function
Supported
ESC.(
ESC.Y
Printer on command
Yes
ESC.)
ESC.Z
Printer off command
Yes
ESC.@
Printer configuration setting command
No (
1
)
ESC.A
Printer model number output command
No (
1
)
ESC.B
Buffer space output command
No (
1
)
ESC.E
Enlargement error number output command
No (
1
)
ESC.H
Handshake mode 1 setting command
No (
1
)
ESC.I
Handshake mode 2 setting command
No (
1
)
ESC.J
Printer engine control command aboard command
No (
1
)
ESC.K
Printing aboard command
No (
1
)
ESC.L
Logical I/O buffer size output command
No (
1
)
ESC.M
Output setting command
No (
1
)
ESC.N
Output mode, handshake mode enlargement setting
command
No (
1
)
ESC.O
Enlargement status output command
No (
1
)
ESC.P
Handshake mode standard setting command
No (
1
)
ESC.Q
Monitor mode setting command
No (
1
)
ESC.R
Reset command
No (
1
)
ESC.S
Buffer size output command
No (
1
)
ESC T
Buffer size setting command
No (
1
)
ESC.U
Flash buffer end
No (
1
)
(
1
) Because serial communication is not supported.
(
2
) Enabled only for binary raster data. For vector data and variable raster data, only color overlap mode is enabled.
(
3
) The fonts of the font numbers specified with the AD and SD commands are printed with the fonts of the
font numbers indicated in the CS command table below.
(
4
) Recognized as EOF.
