Oki Pro9541WT, Руководство пользователя, Страница: 80 / 126

Printing from Trays
Appendix
Setting Up
2
B
efore Use
1
Printing
3
Basic D
evice Oper
ations
4
Index
- 80 -
z z
Printing from Trays
With the exception of some paper sizes, the printer automatically detects the size of paper set in trays
1 to 5
*
. Further, only the width of the paper size is automatically detected.
*: Trays 2 to 5 are optional.
Memo
z
The printer does not automatically detect the following paper sizes.
- A3NOBI, tabloid extra, A3WIDE, 13×18"
- A5, A6
- legal13.5, legal14
- custom
If the printer does not detect automatically, use the control panel to set the paper size. For details, see
“Setting Paper Using
the Control Panel” (P.84) .
z
Set 13x18" as custom size.
Setting Paper in Trays 1 to 5
This section explains how to set paper in tray 1
or trays 2/3/4/5.
Memo
z
In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette ( ).
2
Slide the paper guide ( ) and paper
stopper ( ) to align to the size of the
paper that has been set.
3
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.