manualshive.com logo in svg

Oki OKIPAGE 6e, Руководство по обслуживанию, Страница: 184 / 262

Поделиться
Скачать
Oki OKIPAGE 6e Скачать руководство пользователя страница 184

Diagnostics Tests

C - 3

OKIPAGE 6e/6ex

Service Manual, P/N 59276401

1.2

System Maintenance Mode

The system maintenance mode is set when the power is turned ON while keeping the
Recover key pressed down.

This mode adopts the menu for function selection.

The method for exit from this mode depends on the setting.

The system maintenance mode provides the following functions:

Page Count Display

•

The total number of pages counted at the engine block is displayed on the LCD.

Page Count Printing Enable/Disable

•

This function allows the selection to include (enable) or exclude (disable) the total
number of printed pages counted at the engine block at the time of menu printing.

Rolling ASCII Continuous Printing

•

The rolling ASCII pattern is printed continuously for various engine tests.

•

Press the ON-LINE key to cancel this mode.

•

After the operation, the power is turned off.  It will not go to operation mode or any
maintenance mode automatically.

EEPROM Reset

•

All EEPROM areas including Menu level-2 are reset to the factory default values.

•

The following items are excluded.

Engine maintenance items
REVISIONS (as well as factory user setting)

•

Transition to the operation mode occurs completion of resetting.

Switching of Valid orIinvalid HIPER-W Emulation

Switching of Valid or Invalid SIDM Emulation

Содержание OKIPAGE 6e







































































































































































































































































Отзывы:

Нет отзывов