Oki MC573 Скачать руководство пользователя страница 166

Страница: 166 / 225

- 166 -

8. Maintenance

This section describes how to replace the image drum and toner cartridge with new ones at
the same time.

• Use extra care when handling the image drum (the green cylinder), because it is fragile.

• Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Do not leave the

image drum for 5 minutes or more even under room light.

Prepare new image drum and toner cartridge.

Hold the handle (B) and open the scanner unit (a) completely.

Press the button (A) and open the output tray (b) completely.

Identify an empty toner cartridge by its label color.

Remove the image drum (c) from the machine and place it on a flat surface.

Replacing the Image Drum and Toner Cartridge at the Same
Time

Burns may result.

The fuser unit is extremely hot. Do not touch it.

Содержание MC573


































































































































































































































Результаты поиска

Содержание MC573

Отзывы:

Похожие инструкции для MC573

Бренды по названию

Популярные бренды

Oki MC573, Руководство пользователя

Результаты поиска

Содержание MC573

Отзывы:

Похожие инструкции для MC573

Бренды по названию

Популярные бренды