Oki MC573 Скачать руководство пользователя страница 353

Страница: 353 / 507

- 353 -

9. Operating Management/ Specifications

Click [Submit].

When the access control function is enabled, the top screen on the control panel of the
machine is changed as follows.

To use IC card authentication, connecting an IC card reader is required.

The message, "Authent. by IC card is also available." is not displayed if no IC card reader is connected.

When the access control function is enabled, the user authentication is required to display
the login screen, or copy or scan screen.

This section describes how to log in to the machine using the user authentication with user
name and password.

When you want to use an IC card to log in to the machine, register the IC card information to the machine in either of
the following ways beforehand.

• The administrator specifies IC card information when registering user information.

Registering Users

• Users hold their IC cards over the machine to register after logging in to the machine with user name and password,

or PIN.

Registering IC Card Information

Enter a user name.

Enter a password.

Perform an operation such as copy or scan.

Log in to This Machine

Содержание MC573




























































































































































































































































































































































































































































































































Результаты поиска

Содержание MC573

Отзывы:

Бренды по названию

Популярные бренды

Oki MC573, Руководство для продвинутых пользователей

Результаты поиска

Содержание MC573

Отзывы:

Бренды по названию

Популярные бренды