Oki MC573, Руководство для продвинутых пользователей

Страница: 335 / 507

- 335 -
9. Operating Management/ Specifications
System Configuration Menu
PCL Setup
PS Setup
UCR UCR Low Adjusts the level of under
color removal.
CMY100% Density CMY100% Density Disable Selects whether to use
halftone for C, M, Y 100%
density.
CMYK Conversion CMYK Conversion ON Selects whether to use
simple (quick) mode when
performing CMYK
Conversion.
This menu setting is
disabled if using the ink
simulation function.
Item Factory default setting Description
Personality Auto Selects the emulation mode. If auto is
set, the correct emulation is
automatically selected every time a
print job is received.
Alarm Release Manual If [Manual] is set, non-critical
warnings, such as requests for a
different paper size, can be cleared by
pressing [RESET]. If [Auto] is set, the
warnings are cleared when the print
job resumes.
Auto Continue OFF Sets whether the machine
automatically recovers from a memory
overflow.
Error Report OFF Sets whether to print error details if
PostScript errors occur.
Item Factory default setting Description
Font Source Resident Selects the location of the
font to use.
Font No. I0 Selects the font number to
use.
Available range: I0 to I90 if
[Resident] is set/C1 to C4 if
[Resident 2] is set.
Item Factory default setting Description
Font Pitch 10.00 CPI Sets the width of the PCL
default font.
Available range: 0.44 to
99.99 CPI. (0.01CPI
increments)
Font Height 12.00 point(s) Sets the height of the PCL
default font.
Available range: 4.00 to
999.75 point. (0.25 point
increments)
Symbol Set PC-8 Selects a PCL symbol set.
A4 Print Width 78 Column Sets the number of digits for
automatic line feed on A4
paper.
White Page Skip OFF Selects whether to print
blank pages.
CR Function CR Sets the machine operation
when receiving CR code.
LF Function LF Sets the machine operation
when receiving LF code.
Print Margin Normal Sets the nonprintable area
of the page.
True Black OFF Selects whether to print
black image data using
mixed CMYK or print using
black toner only.
Pen Width Adjust ON Sets whether to emphasize
thin lines so that the lines
look thicker.
Tray ID# Tray 1 1 Sets a value that specifies a
tray with the PCL paper
source specification
command.
Available range: 1 to 59
Tray 2 (Optional) 5
Tray 3 (Optional) 20
MP Tray 4
Item Factory default setting Description
L1 Tray Type 1 Set the paper tray number for the
Level 1 operator.
[Type 1]: The effective number for
paper tray starts from 1.
[Type 2]: The effective number for
paper tray starts from 0.
Item Factory default setting Description