Configuring Copy Settings
- 75 -
Co
pyin
g
2
Configuring Copy Settings
You can change the copy settings to alter the output to suit your needs. Each setting can be configured
from the [
Change Settings
] menu on the copy standby screen.
Perform the following procedures at step 3 of "Starting a Copy Job" P. 74 described above.
Reference
The changes made in the [
Change Settings
] menu on the copy standby screen are temporary. You can change the default
settings by configuring [
Admin Setup
] from the <
SETTING
> key. For details, refer to the User's Manual Advanced.
Changing the Scan Size (Scan Size)
You can select the appropriate size of the
document to be scanned.
1
Press the to enter the [
Change
Settings
] menu.
2
Make sure that [
Scan Size
] is selected
and then press .
3
Press the to select a scan size and
then press .
4
Press the until the start screen is
displayed.
Changing the Paper Tray
(Paper Feed)
You can select the size of the document to be
copied.
1
Press the to enter the [
Change
Settings
] menu.
2
Press the to select [
Paper Feed
] and
then press .
3
Press the to select a tray and then
press .
4
Press the until the start screen is
displayed.
Memo
[
Tray 2
] is displayed only when the optional second tray
unit is installed.
When set to [
Auto
], the MP tray is not selected in the
default setting. To use the MP tray, press the <
SETTING
>
key and select [
Paper Setup
] > [
Select Tray
] > [
Copy
] >
[
MP tray
], and then select [
ON
] or [
ON (Prior)
].
When set to [
Auto
], the paper tray that holds paper other
than A4, B5, A5, A6, letter, legal 13/13.5/14, or executive
is not selected. To use a different paper size, select the
desired paper tray in the [
Paper Feed Tray
] setting.
Copying Using the MP Tray
If you have selected [
MP Tray
], you can copy
your documents onto the paper loaded on the MP
tray.
1
Place your document with text face up in
the ADF or face down on the document
glass.
2
Load the paper on the MP tray.
3
Press
or .
4
When the pop-up message is displayed,
press the or to select [
Start
] and
then press .
Reference
For details on how to load the paper on the MP tray, refer
to "Loading Paper on the MP Tray" P. 68.
Settable Values:
A4* A5 A6 B5 Letter Legal 13
Legal 13.5 Legal 14 Executive
*indicates the factory default.
Settable Values:
Auto* Tray 1 Tray 2 MP Tray
*indicates the factory default.
OK
OK
OK
OK
M
ONO
C
OLOR
OK
