Replacing Consumable Items
- 166 -
6
Turn the lock levers (3) on each side of
the belt unit toward you, hold the lock
levers with both hands and then remove
the belt unit.
7
Unpack the new replacement belt unit.
8
Hold the blue lock levers (4) of the
replacement belt unit with both hands
and place it into the machine.
Hook the roller (5) in both edges of the belt unit
on the groove (6) in the machine, and place the
rear end of the belt unit.
9
Turn the lock levers (7) of the
replacement belt unit away from you.
10
Hold the blue handles (2) of the image
drum unit with both hands and place it into
the machine so that the K toner cartridge
can be positioned in the front (8).
11
Close the top cover.
12
Close the scanner unit.
Memo
If you dispose of a toner cartridge by necessity, put it in a
polyethylene bag or something and then dispose of it in
accordance with your municipality's ordinances or guidelines.
Replacing the Fuser Unit
Life Duration of Fuser Unit
When the [
Fuser Unit Near Life
] message
appears on the display screen, prepare a
replacement fuser unit. You can keep printing
approximately 750 pages until the next message
appears.
When the [
Please change Fuser Unit
]
message appears, replace the fuser unit.
The life expectancy of the fuser unit is up to
60,000 pages for A4 simplex printing.
Note
The actual number of pages you can print with the fuser
unit depends on how you use it.
Note
Though opening and closing the top cover may extend the
life of a fuser unit for a while, it is recommended to replace
it soon after the [
Please change Fuser Unit
] is
displayed.
If you replace the fuser unit, use it until the end of its
useable life. If you remove the fuser unit and install and
use another one before its usable life has expired, the use
life will not be correctly displayed.
When the <
SETTING
> key > [
Admin Setup
] >
[
Management
] > [
System Setup
] > [
Status in Near
Life
] is set to [
Disable
], the [
Fuser Unit Near Life
]
message does not appear.
3
4
5
6
7
7
2
8
