11 English
1.
In the top level screen, scroll down to
Menu
and select using the
Enter
key.
2.
In the drop down menu, scroll down to the
Admin Menu
and select using the
Enter
key. Enter the password.
3.
In the drop down menu, scroll down to
Fax Setup
and select using the
Enter
key.
4.
In the drop down menu, scroll down to
Basic Setup
and select using the
Enter
key.
5.
In the drop down menu, scroll down to the
Ring Response
and select using the
Enter
key.
6.
In the drop down menu, scroll down to the response time required and select
using the
Enter
key.
7.
Using the Left arrow key, return to the top level menu.
Setting Access Control
The operation and functionality of this machine can be limited only to authorized
personnel by the simple introduction of a 4-9 digit PIN (Personal Identification
Number). This is known as Access Control. The greater the number of digits in the
PIN, the more secure it is.
Enable/Disable Access Control
To enable Access Control, use the menu to go to:
Menu
>
Admin Setup>System
Setup>Access Control
and select
Enable
.
•
With Access Control set to
Enable
, the display reverts to the System Setup
screen immediately following the setting change. If one of the functions such as
Print, Fax Send or PC Scan is running however, the display will only revert to
the System Setup screen when the task has been completed.
Содержание MC360 MFP
Страница 2: ......
