Oki MC160N Скачать руководство пользователя страница 248

Страница: 248 / 268

248

Installing Accessories

Introduction

Note

Use of accessories not manufactured by OKI may void your warranty if any
damage is found to be caused by such accessories.

This chapter provides information about the following accessories.

Note

Installing accessories always requires that the machine and accessories are
turned off and unplugged during installation.

For details on the available options, refer to

http://www.okiprintingsolutions.com

Tray 2

Lower feeder unit with 500-sheet tray included

Duplex Option

Auto duplexing

In order for the duplex option to be installed,
Tray 2 must be installed on the machine.

Duplex Option and
Attachment

Auto duplexing

The attachment is an interface unit for installing
the duplex option on the machine.

During installation, install the attachment before
installing the duplex option.

Содержание MC160N













































































































































































































































































Результаты поиска

Содержание MC160N

Отзывы:

Бренды по названию

Популярные бренды

Oki MC160N, Руководство пользователя

Результаты поиска

Содержание MC160N

Отзывы:

Бренды по названию

Популярные бренды