Oki MC160N Скачать руководство пользователя страница 104

Страница: 104 / 268

104

Using the Printer Driver

Printer Driver Settings

Common Buttons

The buttons described below appear on each tab.

Click to exit the Properties dialog box, saving any changes made.

Cancel

Click to exit the Properties dialog box without saving any changes made.

Apply

Click to save all changes without exiting the Properties dialog box.

Help

Click to view the help.

Easy Set

Click

Save

to save the current settings. Specify a

Name

and

Comment

access the settings for use again later.

Name:

Type in the name of the settings to be saved.

Comment:

Add a simple comment to the settings to be saved.

Afterward, the saved settings can be selected from the drop-down list. To
change the registered settings, click

Edit

Select

Default

from the drop-down list to reset the functions in all tabs to their

default values.

Printer View

Click the button to display an image of the printer in the figure area.

When this button is clicked, it changes to the

Paper View

button (when a tab

other than the

Watermark

tab or

Quality

tab is selected), the

Watermark

View

button (when the

Watermark

tab is selected), or the

Quality View

but-

ton (when the

Quality

tab is selected).

This button does not appear on the

Version

tab.

Paper View

Click the button to display a sample of the page layout in the figure area.

When this button is clicked, it changes to the

Printer View

button.

This button does not appear on the

Watermark

Quality

and

Version

tabs.

Содержание MC160N













































































































































































































































































Результаты поиска

Содержание MC160N

Отзывы:

Oki MC160N, Руководство пользователя, Страница: 104 / 268

Результаты поиска

Содержание MC160N

Отзывы: