Oki MB770dn, Руководство пользователя

Страница: 74 / 336

2
1
3
4
5
6
7
OTHER PRINTING METHODS
- 74 -
●
OTHER PRINTING METHODS
FTP Printing
FTP printing is available when the FTP print service is enabled
in this equipment.
You can print a document by sending the print file to this
equipment using the FTP. This equipment can accept the
following files for printing:
• PCL file
• PS (PostScript) file
• Text file
Note
• When the User Management setting is enabled, a print job
sent in FTP printing is processed as an invalid job according
to the User Authentication Enforcement setting. For more
information about the User Authentication Enforcement
setting, refer to the
TopAccess Guide .
Memo
• In Windows, you can create the PCL file and PS file using
the machine driver. To create the PCL file or PS file, change
the printer port of the printer driver to “FILE:” port and print a
document using the printer driver. For more information
about printing to a file, refer to the Windows documentation.
• In Macintosh, you can create the PS file using the printer
driver. To create the PS file, select “File” at the [Destination]
box in the Print dialog box to print. For more information
about printing to a file, refer to the Macintosh
documentation.
Printing a file using the FTP command
The procedure below describes the example of printing using
the FTP command with the MS-DOS Prompt.
1
Launch the MS-DOS Prompt.
2
Change the current directory to that in
which the print file is located.
3
Type following command and press the
[Enter] key:
ftp <IP Address>
In the <IP Address> section, enter the IP address of this
equipment.
4
If it prompts you to enter the user name,
enter the FTP Print User Name and press
the [Enter] key.
Note
• It prompts you to enter the user name if the FTP Print
User Name is assigned by an administrator. Ask your
administrator for the FTP Print User Name.
5
If it prompts you to enter the password,
enter the FTP Print Password and press the
[Enter] key.
Note
• It prompts you to enter the password if the FTP Print
User Name is assigned by an administrator. Ask your
administrator for the FTP Print Password.
• If the FTP Print User Name has been assigned but the
FTP Print Password is blank, do not enter when it
prompts you to enter the password and press the
[Enter] key.
6
Type the following command and press the
[Enter] key:
put <file name>
For example, if the print file name is “sample.ps”:
put sample.ps
7
The file is sent to this equipment and
spooled in the queue.