Oki MB770, Руководство по обслуживанию

Страница: 91 / 104

45372301TH Rev.2
6-14 /
Oki Data CONFIDENTIAL
6.2 Alarm
The CPU on the Finisher control PC board (FIN) is equipped with a self-diagnostic function to check the
Finisher condition as needed; when it detects an error, the Finisher transmits the content of the error to
the equipment.
6.3 Other
Misalignment (Alignment error) of output may increase when paper is in curl. The following measures
may reduce the alignment error.
Error Condition Timing of detection Operation Resetting
Staple cartridge
empty
The staple empty
sensor detects that
the staple cartridge
has run out of sta-
ples while the staple
unit is not operating.
When the staple unit
is not operating.
Normal operation
will continue; how-
ever, operation is
subject to instruc-
tions from the equip-
ment.
Replace the staple
cartridge; or, set it
correctly.
Stack tray full "Full" detected by
stacker lower limit
switch.
Monitoring at all
times.
Approximately 50
sheets of paper can
be added after the
alarm is sent.
The stack of paper
was removed from
the stacker tray and
the stacker lower
limit switch detected
"Not full".
Error content
Misalignment (Alignment error) of output increases.
Measures
Turn over the stack of paper in the drawer or tray.