Oki MB492dn Скачать руководство пользователя страница 631

Страница: 631 / 1228

Other Problems

Memo

If you cannot solve a problem with the following solutions, contact your dealer.

Symptom

Cause

Solution

Reference

Nothing is displayed

on the display screen

after turning the

machine on.

The power cord is unplugged.

Turn the machine off, and then plug in the

power cord firmly.

The power is out.

Check whether the power is supplied to the

outlet.

The machine does

not operate.

The power cord is not firmly plugged in.

Plug in the power cord firmly.

The machine is turned off.

Turn the machine on.

Turning the

Machine On

The power switch

LED lamp quickly

flashes at

approximately 0.3-

second intervals.

A malfunction may occur in the machine.

Unplug the power cord immediately, and then

contact your dealer.

The machine does

not start printing.

An error is displayed.

Check the error code, and then follow the on-

screen instructions.

Error Message

A LAN cable or USB cable is unplugged.

Plug in a LAN cable or USB cable firmly.

There may be a problem with a LAN cable

or USB cable.

Use another LAN cable or USB cable.

A LAN cable or USB cable does not meet

the standard.

Use a USB 2.0 cable.
Use an Ethernet 10BASE-T/ 100BASE-TX

cable.

There may be a problem with the print

function.

Press [Device Settings], select [Reports] >

[Configuration], and print out the

configuration list to check the printing

performance.

Reports

A communication protocol is disabled.

Press [Device Settings], select [Admin Setup]

> [Network Menu] > [Network Setup] >

[Network Setting], and then enable the

communication protocol that you are using.

A printer driver is not selected.

Set the printer driver of the machine as the

default printer.

The output port of the printer driver is

incorrect.

Specify the output port for connecting a LAN

cable or USB cable.

Nothing is displayed

on the display

screen.

The machine is in Sleep mode or Deep

Sleep mode.

Check the (POWER SAVE) button flashes,

and then start the machine by pressing the

(POWER SAVE) button.

Using the

Operator Panel

Print data is not

sent.

A LAN cable or USB cable is damaged.

Connect a new cable.

The time-out period set on the computer

has elapsed.

Set a longer time-out period.

There is an abnormal

sound.

The machine is inclined.

Place the machine on a flat surface.

There are waste paper or foreign objects

inside the machine.

Check inside the machine, and then remove

any objects.

The top cover is opened.

Close the top cover.

630

Содержание MB492dn













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MB492dn

Отзывы:

Похожие инструкции для MB492dn

Бренды по названию

Популярные бренды

Oki MB492dn, Руководство пользователя

Результаты поиска

Содержание MB492dn

Отзывы:

Похожие инструкции для MB492dn

Бренды по названию

Популярные бренды