English
Use to charge the battery pack without having
the printer connected to an AC outlet.
WARNING
Never use the battery charger with any
other battery pack except for the
specified type.
Doing so can rupture
the battery, or cause leakage, fire or
electric shocks
.
WARNING
Do not use wet hands to replace the
battery pack or to unplug the battery
charger. Doing so increases the risk of
electric shock.
Charging the Battery Pack
1. Connect the charger to the wall outlet and turn
on the power.
The POWER lamp lights red.
2. Align the battery pack with its metal contacts
facing front, and slide it forward into the charger.
The CHARGE lamp lights red when charging
starts. It turns off when the battery pack is fully
charged.
3. Slide the battery pack out of the charger.
Notes
• If the POWER lamp does not light when you
turn on the power, check the power cord
connection.
• If the CHARGE lamp does not light at the start
of charging, make sure the battery pack is
firmly mounted into the charger. Poor
mounting of the battery pack may result in
faulty charging.
• When a fully charged battery pack is placed in
the battery charger, the CHARGE lamp turns
on and then off.
• When charging a battery pack that has not
been used for a long time, the CHARGE lamp
may blink for a while. This does not indicate an
error. You can continue charging.
• The battery pack can be recharged about 300
times (when used at normal temperatures). If
the battery pack is fully charged but runs out
quickly, replace it with a new battery.
Charging Time
It takes about 2.5 hours for a fully discharged
battery pack to return to a fully charged state.
Installation Instructions
Single-Slot Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chargeur de bloc-pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cargador para una pila . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Carregador de bateria com um soquete . . . . . . . . . . . . . . . . . . 4
