Oki LE840, Техническое описание

Страница: 69 / 180

- 67 -
8.34 ~DY DOWNLOAD OBJECTS
Format: ^DYd:f,b,x,t,w,data
d = Drive
R : RAM
E : On-board Flash ROM
B : USB memory
A : USB memory
When omitted: R
o = File name
A file name consisting of 1 to 16 characters can be set.
When omitted: UNKNOWN
b = Download format
A : Uncompressed (ZB64, ASCII)
B : Uncompressed (TTE, TTF, binary)
C : AR-compressed (used only by Zebra's BAR-ONE®v5) (unsupported)
P : Portable network graphic (PNG) - B64 encoded
Non-omissible
If C is selected, this command is ignored.
x = Extension
B: Bitmap (BMP)
E: TrueType Extension (TTE)
G: Raw bitmap (GRF)
P: Store as compressed (PNG)
* To be compressed in Base 64 format
T: TrueType (TTF)
X: Paintbrush (PCX)
NRD: Non Readable File (NRD)
PAC: Protected Access Credential (PAC)
C: User defined menu file (WML)
F: User defined webpage file (HTM)
H: Printer feedback file (GET)
When omitted: GRF
* The parameters G, P, and T (TTF) can be saved and read. The other parameters can only be
saved.
t = Total number of bytes in file
Non-omissible
w = Number of bytes per row
Non-omissible
data = Data
A, P : ASCII hexadecimal or ZB64
B
: Binary
Non-omissible
*1 The registered data can be deleted with ^ID/^EG command.
*2 When the extension is set to Oki Data, downloaded objects cannot be handled as font data.
*3 For the common specifications of commands used for the devices, refer to “7.2 COMMANDS
USED FOR DEVICES.”
*4 The format of the data portion of [B64]/[Z64] shall be “:B64:data:CRC” or “:Z64:data:CRC.”
*5 When the [B64]/[Z64] format is saved, the data are read and printing is continued whether CRC is
normal or abnormal.
*6 For TrueType fonts, refer to “7.4 TRUETYPE FONT COMMANDS.”
*7 To handle ZB data through serial interface, ensure the baud rate is 9600 bps or higher.
*8 When the download format is A and ASCII, received data are saved as effective data even if the
graphic data size is smaller than the number of bytes specified in the command.