Oki ES9455, Руководство по установке программного обеспечения

Страница: 179 / 386

8.[Administration] Tab Page
[Setup] Item List 177
8 [Administration] Tab Page
[Add Filter] / [Modify Filter] screen
You can display this screen by clicking the [Add] button for Filter or a registered filter name.
You can create a filter to use in IPsec.
8 Policy Create a policy to use in IPsec by combining the registered profiles.
[Add] button — You can add a policy on the [Add Policy] screen.
P.185 “[Add Policy] / [Modify Policy] screen”
[Delete] button — Select policies to delete and click the [Delete] button to delete them.
Policy Name — Click a registered policy name to modify its content.
P.185 “[Add Policy] / [Modify Policy] screen”
Item name Description
1 [OK] button Saves the folder setting.
2 [Cancel] button Cancels registration of the folder.
3 [Reset] button Returns the settings to the defaults.
4 Filter Name Enter a filter name. You can enter up to 63 alphanumerical characters and symbols other
than #, %, &, +, \ (backslash), ' (apostrophe), ; (semicolon), , (comma), ", and =.
5 Internet Protocol Version Select the IP version for IPsec.
y IPv4 — Select this to use IPsec under the IPv4 environment.
y
IPv6 — Select this to use IPsec under the IPv6 environment.
6 Source Address The IP address of this equipment is set as the source address to which the filter is applied.
[My IP Address] is displayed in this box. This item cannot be changed.
Item name Description
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11