Oki ES9160 MFP, Руководство пользователя

Страница: 14 / 182

1 BEFORE USING EQUIPMENT
12 Placing Paper
 “LT format” is the standard size only for use in North America.

“K format” is a Chinese standard size.
 Abbreviations for paper sizes: LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer, SQ: Square
 Unacceptable copy paper
Do not use the types of paper shown below. This could cause a paper jam.
 Damp paper
 Folded paper
 Curled or creased paper
 Paper whose surface is extremely smooth or rough
Do not use the types of paper shown below. This could cause an equipment malfunction.
 Paper whose surface has had special treatment
 Paper once printed with other copiers or printers
 Precautions for storing copy paper
Make sure of the following when storing copy paper:
 Wrap the paper in its wrapping to keep it free from dust.
 Avoid direct sunlight.
 Store in a damp-free space.
 To prevent paper from being folded or bent, store it in a flat place.

Placing paper in drawers
Follow the procedure below to place paper in a drawer. For acceptable copy paper, see the following page:

P.11 “Acceptable copy paper”
1
Turn the power of this equipment ON.
2
Pull out a drawer carefully until it comes to a stop.
3
Place paper in the drawer.
 Up to 600 sheets (64 g/m
2
) (17 lb. Bond) can be placed in one
drawer. Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides.
 P.11 “Acceptable copy paper”
 Fan and jog the stack of paper well before you place it in a
drawer, or the sheets may not be separated before being fed.
Be careful not to cut your fingers when fanning.
 Place paper with its copy side up. The copy side may be noted
on its wrapping paper.