Oki ES3640eMFP, Руководство по управлению

Страница: 88 / 220

3
3-88 Using Command WorkStation or Command WorkStation LE
ES3640e MFP EFI Job Management Guide - 88
To print pages on tab paper stock, choose True from the Tabs in
Page Range(s) menu, and then choose Tab Stock from the Media
Type menu. By default, tab printing is set to False.
By default, duplexing is set to Off.
5. Choose the source tray containing the specified media type from
the Paper Source menu.
6. Click Add to add the media specification to the Selection List. To
remove a mixed media specification, select it and click Remove.
Define and add more mixed media specifications as needed. Page
ranges not specified as mixed media will print on the media
defined by the Paper Source settings.
7. In the Chapter Start field, enter page numbers on which to start
new chapter sections.
Enter page numbers as comma-separated values (for example:
4,9,17) to designate the start of each new chapter. This feature
forces each starting page to use a right-side page, adding a
preceding left-sided blank, if necessary.
Note:
It is not necessary to enter the first page, and page
numbers refer to the numbering of the original document. If you
use the Chapter Start feature, all media specified in the Paper
menu per chapter must share the same dimensions (for example:
all Letter, all Tabloid, or all A4).
8. Click OK.
The Job Properties dialog box appears.
9. Click OK to close the Job Properties dialog box and apply the
Mixed Media settings to the job.