4
4-94 Performing Setup from the Printing Unit Control Panel
ES3640e MFP EFI Configuration Guide - 94
Password
Enter the password for the e-mail account.
Administrator E-mail User Name
Enter the administrator name of the administrator e-mail account.
This is typically the part of the e-mail address that precedes the @
symbol. For example, in the address [email protected], the adminis-
trator e-mail user name is pat.
Administrator E-mail Domain Name
Enter the name of the domain in which the administrator has an
account. This is typically the part of the e-mail address that fol-
lows the @ symbol. For example, in the address [email protected], the
domain name is test.com.
Note:
The domain name can contain no more than 20 characters.
The administrator authorizes a unique e-mail address to remotely
administer Fiery E-mail Services via e-mail. If an error occurs
while you are executing a job to e-mail, the e-mail service sends
an error message to that administrator e-mail address. The
administrator can authorize additional e-mail addresses as admin-
istrators from this e-mail address.
Timeout (sec)
30–300 [60]
Enter the length of time, in seconds, the Fiery should try to con-
nect to each e-mail server before determining that the connection
is unsuccessful.
Polling Interval (sec)
1–3600 [15]
If you have enabled auto-checking for new messages in the previ-
ous option, enter the interval in seconds at which the Fiery should
automatically check for new e-mail.
