Oki ES3037, Руководство пользователя

Страница: 198 / 256

ES 3037/3037e Troubleshooting • 198
Troubleshooting
LCD MESSAGES
The liquid crystal display (LCD) on the control panel indicates the
printer status and if there is a problem with the printer. Status and
error messages are listed below together with an explanation of
what each message means:
LCD Message Meaning
***** DRUM NEAR LIFE
An image drum is nearing the end of its life.
(***** indicates color)
***** EMPTY
Warning that Tray ***** is empty. MP Tray is Tray 0.
***** NEAR END
The paper in the selected ***** is nearly finished.
(***** indicates paper tray).
***** TONER LOW
Toner is low (***** indicates color).
***** TONER SENSOR
ERROR
Error with the toner sensor (***** indicates color).
Call for service.
BELT UNIT MISSING
Transfer belt unit is missing.
CANCELLING JOB
Cancelling the current job.
CENTRO I/F ERROR
Centronics interface error (parallel interface).
CHANGE ***** IMAGE DRUM
Change the image drum (***** indicates color).
CHANGE BELT UNIT
Change the transfer belt.
CHANGE FUSER UNIT
Change the fuser unit.
CHANGE PAPER TO *****
Paper must be changed to correct paper size and/or
media type (***** indicates size or media type).
CHECK *****
Check Tray ***** for paper jam. MP tray is Tray 0.
CHECK BELT UNIT
Check the transfer belt for paper jam, correct
installation, etc.
CHECK DUPLEX
Check the duplex unit for paper jam, correct
installation, etc.
CHECK FUSER UNIT
Check the fuser unit for paper jam, correct installation,
etc.
CHECK IMAGE DRUM
Check the image drum for correct installation, etc.
Color will be indicated.
COLLATE FAIL
Collating of multiple copies has failed.
COLOR ADJUSTING
Adjusting head so that colors do not shift on to each
other.
COLOR BALANCE ADJUST
Adjust the color balance.