Oki CX4545 MFP, Руководство по копированию

Страница: 72 / 194

3 BASIC COPY MODES
70 Selecting Finishing Mode
4
Select [ROTATE SORT], and then press [OK].
5
Key in the desired number of copies.
6
Select other copy modes as required, and then press the [START] button on the control
panel.

Staple sort mode
When you make more than one set of copies, the copied paper can be automatically stapled set by set. This mode is
called the staple sort mode. If you are using the Finisher MJ-1101 (optional) or the Saddle Stitch Finisher MJ-1106
(optional), you can choose from 3 different stapling positions.
Example: When [FRONT STAPLE] is selected
 Special paper such as OHP film or sticker labels is not applicable.

In the MJ-1101/MJ-1106, copies in different sizes cannot be stapled unless their length is the same. In the MJ-
1031, they can be stapled even if their length is different.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).