Select [Send] button (see blue circles) when complete.
Confirm whether or not the job is done.
2.5 Navigating the Tabs
Scan Tab
Once you have chosen a send method (above), you can select the Scan tab.
Here are several tools for your use.
1.
Check and, if necessary, adjust your
scanner settings
.
2.
Check and, if necessary, adjust your
file format settings
.
3.
Touch the
Scan
button to start the scanner.
The scanned images will appear on screen.
Note
: you can
add more pages
to your current set of images by inserting more documents into the scanner and
touching
the Scan
button again
.
4.
Before you send the images, you may want to make
edits or annotations
- these tools are available by touching the
Edit tab
. Even at this stage you have a chance to go back and change your file format settings if needed.
5.
When you are ready to
send the images
, touch the
Send
button represented by the send method you chose on the
Main tab.
6.
If you have another document to scan, touch
Start Over
to erase your current documents and settings and return to the
Main
tab.
7.
When you have sent all your documents, touch the
Log off
button to end your session.