Oki CX 1145 MFP, Руководство администратора

Страница: 137 / 323

7 TopAccess Administrator Mode
136 Setting up from TopAccess
Setting up the SMTP Client
In SMTP Client, you can enable or disable SMTP transmission for sending the Internet Fax and
Emails.
A From Address setting is also required to send Internet Fax and Emails. For information about
the From Address setting, please refer to the following sections.
P.172 “Setting up Email Settings”
P.174 “Setting up Internet Fax Settings”
The From Address can be also determined automatically when the User Management Setting is
enabled. For more information about the User Management Setting, please refer to
User Man-
agement Guide .
1) Enable SMTP Client
When this is enabled, this equipment sends an Internet Fax and an Email to the specified
SMTP server for transmission over the Internet.
2) Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled for SMTP transmis-
sion.
- Disable — Select this to disable the SSL for SMTP transmission.
- Verify with imported cert — Select this to enable the SSL using the imported CA certif-
icate.
- Accept all certificates without CA — Select this to enable the SSL without using
imported CA certificate.
y When “Verify with imported cert” is selected, you must import the CA certificate in this
equipment.
P.144 “Setting up the Security Service”
y Not all operating systems support SSL for all protocols.
3) SSL/TLS
Select the protocol for the SSL when the “Enable SSL” option is enabled.
- STARTTLS — Select this to send a message in TLS (Transport Layer Security) using
STARTTLS that is the extension command for SMTP transmission.
- Over SSL — Select this to send a message in SLL (Secure Socket Layer).
1
2
3
4
5
6
7
8
9
10