Oki COREFIDO B822dn, Руководство пользователя, Страница: 41 / 453

Preparing and connecting this machine to your PC
- 41 -
Connecting the power cord
About the power supply
AC Voltage: 100V AC (Range: 90 ~ 110V AC)
Power frequency: 50/60 Hz
± 3%

If the power supply is unstable, use a voltage regulator.

The maximum power consumption of this machine is 1,400 W. Check that there is sufficient voltage capacity.

The performance cannot be assured if an uninterruptible power supply (UPS) or inverter is used. Do not use an
uninterruptible power supply or inverter.
Otherwise a fire may be caused.

Be sure to turn off the power supply before attaching or detaching the power cable or earth wire.

Be sure to connect the earth wire to the dedicated earth terminal.
If you cannot get it grounded, contact the store where you purchased the product.

Never connect the earth wire to any water pipe, gas pipe, telephone line ground, lightning rod, etc.

Be sure to connect the earth wire before connecting the power cord to the power outlet. Also, be sure to unplug the
power cable from the power outlet before disconnecting the earth wire.

Be sure to hold the power plug when connecting or disconnecting the power cord.

Be sure to insert the power cord all the way into the power outlet.

Do not connect or disconnect the power cord with wet hands.

Do not lay the power cord in a place where it may be stepped on, and do not place anything on the power cord.

Do not bundle or bind the power cable in use.

Do not use a damaged power cord.

Do not overload the outlet.

Do not connect this machine and any other electric appliances to the same power outlet. In particular, if this machine
shares a same power outlet with an air conditioner, copier, shredder, etc., this machine may malfunction due to
electrical noise. If this machine has to share a power outlet with other appliances, use a commercially available noise
filter or noise cut transformer.

Use the power cord provided with this machine and plug it directly into the power outlet. Do not use a power cord for
other products with this machine.

Do not use any extension cord with this machine. If it is unavoidable, use one with a rating of 15A or higher.

If an extension cord is used, this machine may not work properly due to AC voltage drop.

Do not turn off the power supply or unplug the power cord while printing.

Unplug the power cord if it will be leave unused for a long period of time due to holidays or traveling.

Do not use the power cord that comes with this machine for any other products.
Connecting the power cord
1
Plug the power cord into the power connector of this machine.