Scanning > 40
S
CANNING
TO
E
-
1.
Press the
SCAN TO E-MAIL
button to display the E-mail Send Mode screen (the
Address tab is set by default).
2.
Press the
To
(1) button and enter an e-mail address using one of the following
buttons:
>
Address Book
(2): select an e-mail address from your list of stored addresses
>
LDAP
(3): enter the user name or mail address to search
>
Soft Keyboard
(4): enter an e-mail address directly using the soft keyboard
>
Fax Gateway
(5): select a fax number from your list of stored gateway addresses
For example, using the Soft Keyboard
(a)
Enter an address via the Soft Keyboard.
(b)
Press the
Add
(1) button to add this address to the list.
(c)
Repeat (a) and (b) as required to create the address list.
(d)
Press the
OK
(2) button to place the list of addresses in the
To
destination field.
3.
Repeat Step 2 as required with the
cc
(6) and
Bcc
(7) buttons on the
Address
tab.
4.
If required, press the
From
(8) button and use either the
Address Book
(2) or
Soft
Keyboard
(4) button to enter your sender information then press the
OK
button.
1
6
7
8
2
3
4
5
1
2
