manualshive.com logo in svg

Oki C9600hdn, Руководство по настройке и конфигурации сети, Страница: 213 / 264

Поделиться
Скачать
Oki C9600hdn Скачать руководство пользователя страница 213

 OkiLAN 8200e Network User’s Guide

213

Troubleshooting:
EtherTalk

Not identified by the Chooser and the Setup Utility.

•

Turn the printer off and on again.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

If the network resides in a Zone, make sure the correct Zone name is 
selected in the Chooser. 

•

Make sure the Zone name in the utility related to the NIC is the same as 
the Zone name set in NIC.

•

Make sure AppleTalk, which is displayed at the right bottom of the 
Chooser, is set to Enable. (In some OS versions Network is used instead 
of AppleTalk.)

•

Make sure Ethernet is selected in AppleTalk. (In some OS versions 
Network is used instead of AppleTalk.)

•

Make sure the print driver is selected in the Chooser.

•

Make sure the EtherTalk protocol is set to Enable.

•

Print the NIC settings (see page 12) and confirm that the EtherTalk Port 
name is not blank.

Содержание C9600hdn









































































































































































































































































Отзывы:

Нет отзывов