manualshive.com logo in svg

Oki C9600hdn, Руководство по настройке и конфигурации сети, Страница: 210 / 264

Поделиться
Скачать
Oki C9600hdn Скачать руководство пользователя страница 210

 OkiLAN 8200e Network User’s Guide

210

Troubleshooting:
TCP/IP

Printer cannot find the network interface card.

•

Turn the printer off and on again.

•

Confirm that the network interface is enabled on the printer.

•

Make sure there is a response to the interface card command.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

Run the Self-diagnostic test (with printer on, press and hold the Test 
button on the print server for 3 seconds, then release it). 

•

Make sure that the IP Address, Subnet Mask and Gateway are correct. 

•

Make sure that the TCP/IP protocol is set to Enable.

•

Reset the network interface card to the factory default settings.

•

If DHCP, BOOTP and RARP are not used, ensure they have been set to 
Disable.

Cannot print with lpr and ftp.

•

Turn the printer off and on again.

•

Make sure there is a response to the ping command.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

Make sure the host name and IP address are configured in the 
workstation.

•

Make sure the printer port name is configured in the workstation.

•

There are three port names: lp, euc and sjis. Use lp by default as euc 
and sjis are specific to printers with PostScript available. 

Incorrect User name on the banner page.

•

If printing with lpr, the User name printed is unknown and the Filename 
printed is the Spool file name.

•

If printing with FTP, the User name printed is the User name entered 
during FTP login and the File name printed is the Transmitted file name. 
If the Print Directory name is indicated in the put command, the File 
name is not printed. The Printer name printed is the Logical Directory 
name.

Содержание C9600hdn









































































































































































































































































Отзывы:

Нет отзывов