Oki C9300dn Скачать руководство пользователя страница 181

Страница: 181 / 216

TROUBLESHOOTING > 170

PRINTING FROM WINDOWS

CANNOT CONFIGURE FOR PARALLEL CONNECTION.

CANNOT CONFIGURE FOR USB CONNECTION.

Possible cause

Remedy

The computer does not
support bi-directional
parallel interface.

There is no cure for this problem. You should only use a
computer that does!

Parallel cable does not
meet specifications.

Use a bi-directional parallel cable to IEEE 1284–1994
standard.

The interface is
disabled.

Check that the parallel interface is set to enable.

Configuration
procedure was not
correctly followed or
cancelled.

Configure again from the beginning.

Parallel cable is
disconnected or faulty.

Reconnect or try another cable.

A converter, buffer or
extension cable is
being used.

Test by connecting printer and computer directly.

NOTE

> Windows 95 does not support USB.
> Windows 98 upgraded from Windows 95 may not support USB.
> Windows 98 original installation and Windows Me, 2000, NT and XP

all support USB.

Possible cause

Remedy

Computer does not
support USB interface.

Check if there is a USB controller in the Windows device
manager.

USB cable does not
meet specifications.

Use USB cable to specification Ver.1.1.

Interface is disabled.

Check that USB interface is set to Enable.

Содержание C9300dn

























































































































































































































Результаты поиска

Содержание C9300dn

Отзывы:

Похожие инструкции для C9300dn

Бренды по названию

Популярные бренды

Oki C9300dn, Руководство пользователя

Результаты поиска

Содержание C9300dn

Отзывы:

Похожие инструкции для C9300dn

Бренды по названию

Популярные бренды