Oki C911dn, Руководство по устранению неисправностей, Страница: 38 / 90

- 38 -
When some other message appears
Troubleshooting
1
2
Index
Maintenance
Index
Message displayed on the
liquid crystal panel
Error
code
<ATTENTION>
lamp
Causes and
Troubleshooting
Reference
pages
Japanese
“t” column
Check Data
Message Data Write Error
<[CODE]>
- - Failed to write the message data
to be updated. Check data.
-
Install Transfer Roller Unit
Re-set the transfer roller unit
Please see HELP for details
334 Blinking The transfer roller unit is not set
correctly.
Press the [HELP] button, and
solve according to the guidance
shown on the Help screen.
-
The data will be deleted due to an
overprint feature error
Mount the duplex printing unit
and print again. To turn off the
display, press OK
Please see HELP for details
458 Blinking Spot Color over printing is
specified, but the 2-Sided Printing
unit is not there. Printing was
stopped and the print data was
deleted.
Install the 2-Sided Printing unit
and print once again.
Press the [OK] button for deleting
the display of the liquid crystal panel.
(C941/ES9541dn only)
-
The data will be deleted due to an
overprint feature error
Check the paper and paper
settings, then print again. To turn
off the display, press OK
Please see HELP for details
456 Blinking Paper used for printing is not
compatible for Spot Color over
printing. Printing was stopped and
the print data was deleted.
Change the paper, or set to
Normal and print once again.
Press the [OK] button for deleting
the display of the liquid crystal
panel.
(C941/ES9541dn only)
-
Spot Color has been replaced
Press OK to change the Spot Color
settings in the menu to [COLOR]
and restart the system
If you do not want to change
settings, return Spot Color toner,
image drum and Spot Color duct
settings to [MENUCOLOR].
679 Blinking Spot Color has been exchanged
Solve according to the message.
(C941/ES9541dn only)
-
Spot Color has been replaced
Check Spot Color menu settings
Current setting is [MENUCOLOR]
To turn off the display, press OK
678 Blinking Spot Color has been exchanged
Solve according to the message.
(C941/ES9541dn only)
-
Spot Color settings changes
Shut down and restart to enable
new settings
677 Blinking Spot Color setting has been
changed.
Solve according to the message.
(C941/ES9541dn only)
-
Spot color duct has not been
installed
Please install the Spot Color Duct
Please see HELP for details
676 Blinking Spot Color duct has not been
installed.
Please install the Spot Color duct.
(C941/ES9541dn only)
-
Toner cartridge not properly
installed
Reset [COLOR] Toner Cartridge
Please see HELP for details
5440
5441
5442
5443
5444
5445
Blinking The toner cartridge shown in the
message is not set correctly.
Press the [HELP] button, and
solve according to the guidance
shown on the Help screen.
-
[COLOR] Toner Not Installed
Please see HELP for details
6100
6101
6102
6103
6104
6105
Blinking The toner cartridge shown in the
message has not been installed.
Press the [HELP] button, and
solve according to the guidance
shown on the Help screen.
-