background image

- 64 -

4. Print

Paper Output

The machine outputs paper to the Output tray or Rear output tray.

Available paper for output trays.

• Do not open or close the Rear output tray during printing. Paper jams may result.

• Using the Output Tray

Paper is output with the printed side down and piled in chronological order.
They are not available for envelopes, labels, or long paper.

• Open the paper support so that outputs do not slip down from the output tray.

• Check that the rear output tray (1) on the rear side of the machine is closed. While the rear output tray is open, paper 

is always output to the rear output tray.

• Using the Rear Output Tray

Use rear output tray when printing on envelopes, labels, or long paper.
Paper is output with the printed side up and piled in reverse chronological order. 
Plain paper is also available for this output tray.

1

Open the rear output tray (1) on the rear side of the machine.

Output tray

Supported paper type

Capacity

Output tray

• Plain paper
• Recycled paper

250 sheets (80 g/m

2

)

Rear output tray

• Plain paper
• Recycled paper
• Envelope
• 3x5inch, 4x6inch, 5x7inch
• Label

• 100 sheets (80 g/m

2

)

• 10 sheets (thick paper and 

envelopes)

Содержание C824





























































































































































































Отзывы: